Different Types of Solar Panels

The Different Types of Solar Panels

1)      Monocrystalline Silicon Panels

2)      Polycrystalline Silicon Panels

3)      String Ribbon Silicon Panels

4)      Amorphous Silicon Panels

5)      Power Grids Silicon Panels

Monocrystalline Silicon Panels

Monocrystalline Panels are the single crystal solar panels which are created from one sheet of silicon with Metal nailed at the edge to increase the conductivity of electrons. Monocrystalline panels are more expensive as compared to other solar panels. But these are considered to be more effective.

Polycrystalline Silicon Panels

Polycrystalline panels are multi-crystal silicon panels and consist of a multitude of individual photovoltaic cells and nailed to photovoltaic cells which have metal conducting materials to activate the electrons and also connect to the cells together. Polycrystalline are most economical solar panels. And the maintenance cost is also very low because damaged cells can be replaced without replacing an entire panel.

String Ribbon Silicon Panels

String ribbon silicon panels are similar to polycrystalline silicon panels, Only difference is that it has photovoltaic cells which consist of string strips оf silicon and attached to metal bars that connect the strips to form а cell.

Amorphous Silicon Panels

Amorphous silicon panels created are made up of semi conductive metals like copper which is placed over the top of silicon film and attached to some metal pieces. Amorphous Silicon Panels are very lower in prices but may not be very effective.

Power Grids Silicon Panels

Solar power systems are usually grid connected. When nоt producing power, а home wіll revert tо а main electrical power source. An off-grid system if а stand-alone system requiring battery storage. A grid-connected system wills allows for electricity whenever needed. 

All type of Solar Panel Manufacturers are in India and offers all types of solar panels at very competitive prices and all are listed at India's first B2b Solar portal thesolarmart

Solar Panels Manufacturing Process

Solar Panels Manufacturing Process

Step by step Solar Panel Production -

1) Solar cells which are important to manufacturer high quality panels. The type of cells used will depend on the type of panel we intend to manufacture

2) Cells are inspected for cracks and other defects and their power outputs tested. The power output of each cell will determine how many we used in the production of our panels. The Power should increase with each new cell connected

3) Then first thing is to solder two pieces of tin coated tabbing wire to the front of each cell.

4) The front of each cell first and stacked on each other. These cells are known as tabbed cells. The length of the tabbing wire should be twice the length of each cell.

5) Overhanging wire is soldered

6) Them cells welded and connected together in a single row. They are connected to other cells to make a complete panel.

7) Rows are welded together in series using a thicker tabbing wire known as the bus line. Also ensures that the intervals between cells, and cell-levels are the same

8) Lamination is required to protect the solar panels. Laminated panels will extend the life span of the panel as it prevents dust and moisture

9) Laminated panel is then framed with the aluminium panel.

TheSolarmart B2b Portal for solar products has wide range of solar panel manufactures, suppliers and exporters

Solar Panels

Solar panels are devices that convert light into electricity. They are called "solar" panels because most of the time, the most powerful source of light is Sun. Or We can Say that Solar panel are the collection of Solar Cells
Solar power is generated through the use of solar panels.

Solar Panels

Solar Panel

There is one disadvantage though with regard to solar power, and that is, the solar power panels are very expensive to install. But, fortunately this is just a one time expense, because over a period of time you will be able to save substantial amount of money.

Find Solar Panel Suppliers and Solar Panel Manufacturers  at www.thesolarmart.com 

About TheSolarMart

TheSolarMart is India’s first online B2B portal dedicated to the Solar Industry. 


Energy requirement of a growing economy, steady increase in cost of conventional energy and favourable climatic condition has made India, one of the favourite destinations for Global Solar Companies. With regular support from government, the industry is attracting more and more Indian players across the value chain. The role of media has become very crucial to facilitate right & timely information, thereby bridging the gap between Indian Solar players and Global ones.

Our attempt is to create easy and convenient path for buyers & suppliers of this industry to walk through. This would enable them to touch base with each other, locate new avenues,  identify new business opportunities, increase network, bring in more participation; in short, create lot of synergy across the value chain.